Soot behaves differently on porous drywall than it does on non-porous tile or metal, and our Delta, OH technicians adjust technique accordingly.
📞 Call +1-866-484-1409 Now
Chemical sponges lift soot instead of smearing it further into the surface.
We match method to material, not the other way around.
Soot turns corrosive on metal within about 48 hours — we move quickly.
Standard vacuums push soot particles back into the air — ours don't.

The primary method for lifting soot from drywall and painted trim without smearing.
Vacuuming first prevents particulate from smearing once surfaces get wet.
Tile, glass, and metal respond well to solvent cleaners that would stain something more absorbent.
We prioritize metal surfaces early because the corrosion clock starts immediately.
Overhead surfaces carry the heaviest particulate load and need careful sponge technique.
Cleaned on the same visit, not a separate appointment.
A technician answers and mobilizes the fastest available crew.
Mobile units are equipped for both porous and non-porous surfaces.
You approve the scope before any sponge touches a surface.
Nothing closes out until you've inspected the result.
"Our own attempt made the streaks worse — the sponge technique they used actually worked." — Homeowner, Delta
"They caught the soot on our kitchen faucet before any real pitting started, which the adjuster said saved us a hardware replacement claim." — Homeowner, Delta, OH
"I didn't expect the vacuum step to matter, but the carpets ended up much cleaner than our attempt." — Homeowner, Delta
Regular cloths spread soot rather than lifting it out.
Ideally within 48 hours, since acidic residue starts pitting metal after that.
Surface type determines whether we use dry sponges or solvent cleaners.
Cleaning reduces odor, but persistent smell may need a separate treatment step.
Carpets get vacuumed first to prevent smearing during later steps.
We keep response times short across Delta because soot corrosion is time-sensitive.
